Origen Genesis V2 MKII 4ml Tank

Origen Genesis V2 MKII 4ml Tank

Changes:
• New center pin and nut to fasten the wire at the + pole (no more need to screwing the + pole to get the hole into the right position).
• New shape of the "neck” -where the top cap goes on- to avoid sticking of the top cap
• Harder material by the O-ring -inside of the top cap- for less swelling
• New weider ring to fasten the tank section (for better grip when disassembling)
• The tanks are not threaded; the fastener ring held it in place
• Material is thicker at the 510 threading 

- Origen Genesis v2-MkII (4ml version):
(spares: O-rings, one hex screw for the "-" pole,
two grub screw for the "+" pole, hex key, one
fill screw)
- Diameter: 22mm
- Height: 34,5mm
- Weight: 35gr
- Capacity: about 4ml
- Airflow control: 1.2mm – 1,5mm – 2,0mm - 2,5mm
for dual or single coil, and 2x1,2mm stacked for single
coil use only