"Prince of Darkness" Lernaia Hydra Mod & Zorbas VW Matte

Limited Prince of Darkness Edition

After it's long anticipated release, the Lernaia Hydra has finally arrived. Made by El Cig Art in Greece, the Hydra is a 100% Mechanical device (no electrical parts). The Lernaia Hydra POD is not modular and only accommodates use with a single 18650 battery (other battery tubes sold separately. The tube and top cap are all reverse threaded. Beautiful engravings are on the front of the mod and on the switch. The sleek lines of this mod scream elegance, but one of the nicest things about this mod is the switch and the locking mechanism. The switch doesn't protrude from the mod and doesn't require much effort to make contact, and the lock simply clicks off and on with less than 1/4th of a turn. No need to worry about reverse or regular threaded locking switch, it's just a simple click. It's so remarkably simple, yet it's difficult to not be impressed by how nice it is to have a lock like this. This mod screams quality from top to bottom.

Specs

• Solid tube design, allows for use with 18650 batteries (other tube sizes sold separately)
• Reverse threaded tube and top cap
• Comes in a wooden box with a polishing cloth
• Matte finish
• 22mm diameter
• Stainless Steel

Made by El Cig Art in Greece, the state of the art Zorba is an attachment that will turn ANY MECHANICAL DEVICE WITH A 510 CONNECTION INTO A VARIABLE WATTAGE DEVICE. Use the 510 connection to connect to any mechanical mod that uses a 510 connection, or connect it directly to the Lernaia Hydra. These are 22mm in diameter.

Specs

• All functions are controlled from the existing switch of Mod and indications are read by a bi color LED.
• * Display and setting in 1 Watt increments, from 6 to 22 Watts.
• Constant force throughout the discharge of the battery, regardless of the change in the ohmic resistance due to temperature.
• Display absence atomizer.
• ** Works with resistances 0.8-4 Ohm.
• Stops the operation and alert when battery discharge in a safe limit of 3.2V.
• The device has electronic protection for reverse battery
• Protection from shorted atomizer and protection from atomizer which shorts in during use.
• Stop after continuous operation of 15" from 6-12 watt and instant recovery. Stop after continuous operation 10" from 13-22 watt and instant recovery.
• The power supply connects directly the battery in the atomizer when the power from the battery is higher than the adjusted.
• Protection circuit against high temperature, shutdown.
• Keeps in memory, all settings and parameters without battery.
• Fits in all existing mechanical Mod with threaded 510.
• Fits directly on LERNAIA HYDRA.
• 2 years written warranty, replacement with new equipment, as long as there are no signs of tampering or intervention.
• Upgradeable ability of a new program, in the same model within the warranty period for free, (shipping costs for the customer).

The power supply continuously monitors the Current and the Voltage of the output and calculates the output power (Watts).

If the output power is higher than the set power it operates as a bypass wire shutting down the boost circuit

and connecting the resistor to the battery with zero loses.

If the resistance is 2.2 ohm and voltage of battery 4.2 volt then we have 8 watt. If the power supply is set to 6 watt, will act as a cable and outlet will take 8 watt. If set 9 watt or more, then the power supply begins to operate and automatically transfers in the atomizer 9 or above watt. In the event that the required power is less, operates as a switch and connects directly the battery in the atomizer. We must use resistors over 2.6 ohm, to get 6 watt power.

** The circuit is only boost, ie it can give an output voltage of the battery voltage and over.

This means that even a full battery 4.2 v, the output power will be V2 / R

If the resistance is 2 ohm we will be to 8.82 watts. So the boost will be start from 9 watts and up.