Please Note: We cannot currently process orders with any items covered by the PACT Act outside of Florida.

We will be adding additional locations as circumstances permit.
All orders received from the state of Florida will be processed with the shipping method currently available:
USPS Priority Mail with adult signature required. Non-covered items can be shipped anywhere.

Other products by Taifun
Item #: VA11219
Our Price: $179.95
The product is currently out of stock.
Click here to be notified when this item is back in stock and available again for purchase 


Product information "Taifun GTR"


With the Taifun® GTR, we rely on proven concepts and combine them with new aspects to meet the needs of the users. Despite its low overall height, the Taifun® GTR has a top fill system, liquid control and variable air flow control.

The inconspicuous look of the Taifun® GTR hides some unusual solutions for well-known functions.

The TopCap completely dispenses with a thread for a Taifun® vaporizer for the first time. The new quick release fastener is extremely robust and user-friendly. The tank can be opened and closed with just a minimal turn without missing a high-quality impression in the slightest.


With regard to DIN CENTS 17287, we were looking for an alternative to the well-known transparent plastic tanks and glass, with success.

For the first time, the Taifun® GTR will be delivered with a plastic tank again. The material used, polysulfone (PSU), is a transparent plastic that is one of the high-temperature resistant high-performance thermoplastics. The tank is hard in a temperature range of -100 ° C to 190 ° C and its ignition temperature (caused by a flame) is just under 500 ° C. In addition, it has an extremely high chemical resistance and has survived all previous tests with the known "tank crackers" without any damage or stress cracks. 


The Taifun® GTR has two separate air channels. In the basic version, the cross-sections of the channels are 1.0mm and 1.2mm. Via the snap-ball-supported AFC, both channels can either be opened fully or half individually, or together fully or half.
The AFC ring of the Taifun® GTR has a stop in both directions. However, the intelligent arrangement of the air holes does not lead to a setting from small to large. The adjustment path is kept as short as possible and the outer opening is only ever exposed, halved or closed with a click to the right or left (depending on the selected air hole). In order to save overall height, the corrugated AFC ring also serves to assemble / disassemble the evaporator.
The possibilities of the AFC allow a wider range in the restrictive steam area without much effort. Both fans of the classic, very strict MTL and supporters of the very restrictive DL steaming can adjust the air supply to their personal needs without having to accept compression losses under the winding.


The Taifun® GTR is designed for versatile use in the restrictive area. This reflects the new arrangement of the Liquidcontrol.
One user vaporizes less viscous liquids with less power and higher negative pressure and the other more viscous liquids with more power and more air.
To meet these requirements, a liquid control is required which can be adapted to the individual requirements of the users to a certain extent. Simply turning it up is not enough for a satisfying steam experience in the area of MTL and restrictive DL.
The left liquid channel is optimized for 50/50 liquids with low performance and greater negative pressure in the chamber. Due to the narrower and higher riser, the chamber is not flooded under the conditions mentioned above.
The right channel is suitable for 70/30 + liquids with increased performance due to its wider milling and lower rise height. With a longer train duration, both channels can also be opened here. The Liquid Control is set by simply and easily turning the tank. 4 recesses for the accesses on both sides allow a very short rotation in the circumference, no matter where the thread starts.


The wrapping deck of the Taifun® GTR is the logical continuation of the "Taifun Deck" introduced with the GT IV. The wire receptacles correspond to those of the Taifun® BTD with the improved lugs for easier wire reception.
The 2-sided ventilation introduced with the Taifun® GT IV was also adapted to the requirements of a purebred restrictive evaporator. Both air ducts emerge slightly obliquely under the winding and allow the coil to be variably adjusted to the needs of the user in terms of taste and "flash".
In principle, "keep it simple" also applies to the Taifun® GTR. The deck does not require great wrapping skills or cotton laying techniques for an optimal vaping experience. Simply install the coil, pull the cotton wool through and put it in your pocket. Finished.


Technical specifications

  • Diameter 23mm
  • Height 40mm (without DripTip with 510 connection)
  • 510 DripTip
  • Stainless steel 1.4301, PEEK, PSU
  • adjustable AFC over 2 holes with 1.0mm and 1.2mm


  • Taifun® GTR RTA
  • 510 DripTip
  • Spare parts bags
  • operation manual


Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category

If you have any problems or questions placing an order, please feel free to contact us between 10AM and 6PM, Eastern Time, Monday through Friday at 1-305-255-5427.

PLEASE NOTE: Orders placed before 2PM Eastern time will usually ship on the same day. Orders placed after this time will usually ship the next business day. When your order ships, you will be sent an email with tracking information. Please keep in mind that packages are taking longer than usual and we cannot control the time in transit.

IMPORTANT: in order to comply with the PACT Act, all covered items shipped to US addresses will be sent with a requirement for adult signature. Thank you for your patience.
Due to credit card fraud activity, we have increased security on the web site,
including enhanced billing address verification and Captcha.
We apologize for the inconvenience.


Pin It

Email A Friend

Send your friend a link to this product.